ADVENTUREGLASS     

Home of: The Swan Paddleboat, Duck Paddleboat, Blue Herron Paddleboat, Pink Flamingo Paddleboat, Pelican Paddleboat, Dragon/Dinosaur Peddle-boat, Pirate Ship Paddle-boat, African Queen boat, Venetian Gondola Paddleboats. Smaller size paddleboats, Fiberglass rock panels, Fiberglass Rock, well cover rock, Satellite dish cover rock and others, Landscaping, Docks & Piers, Dock boxes & Accessories,  Horse drawn Buggies & Carriages, cruise boat/ Stern wheel Riverboat

Instructions for mounting Rigging onto Pirate ship.

1.       Take the large Eyebolt and hold on mast approximately 1-2 inches under the bucket, hold the 3 small eyebolts in place at the edge of the boat. It is important that the ropes aren’t slack. When you have determined exactly where the large eyebolt should be mounted, mark where to drill the hole.

2.       Drill a 3/32-inch hole at your mark, in the mast.

3.       Mount the large eyebolt onto the mast.

4.       Now hold the 3 small eyebolts in place (make sure the rigging (ropes) are snug (tight)). Mark where to drill holes.

5.       Drill the holes with a 3/16 drill bit.

6.       Repeat procedure for other side.

Contact Information:

Send mail to dant@adventureglass.com  with questions or comments about this web site.
Copyright © 2006 ADVENTUREGLASS